Skip to product information
1 of 7


Lura Quindici - Open Baffle Speakers System

Lura Quindici - Open Baffle Speakers System

Horn Color

AudioLai products are handcrafted and tested with rigor and accuracy... all this makes each product unique.


The Hybrid AudioLai QUINDICI speakers of the LURA series are an integral part of the 3-way multi-amplified audio system designed and built by AudioLai .

These speakers are handcrafted in Italy with quality materials and with the utmost attention to detail.

The structure of the speakers is made of solid ash wood and the front panels in solid walnut or oak wood.
The solid wood used, to ensure maximum stability over time and have high rigidity, is made up of three layers perfectly glued together.
The 15-inch woofers are applied to the solid wood panel using the proprietary AudioLai PurOX system using 5mm thick stainless steel sheets to ensure maximum adhesion and vibration control even at low frequencies.

AudioLai Lura Dieci System

The QUINDICI speakers were designed for the LURA system equipped with multi-amplification via AudioLai amplifiers and via a digital signal processor and a digital crossover, therefore they do not have any type of passive crossover on board.
This technology allows you to make the most of the qualities of the drivers mounted and to have maximum flexibility in adapting to any type of environment in which the system is mounted, starting from the frequency response, the temporal alignment of the drivers, the alignment of the phase and impulse management.
All this to make the listening experience unique in every environment.

For information do not hesitate to contact our staff by email:
or by phone or whatsapp: +39 379 1635323

The LURA QUINDICI speakers are composed of the following drivers:

  • 2 dipole-loaded 15-inch paper woofers (8ohm)
  • 1 x 2 inch compression midrange with 600mm diameter exponential horn (8ohm)
  • 1 x 1 inch compression tweeter with 180mm diameter exponential horn (8ohm)

Diagram of the AudioLai multi-amplified system:

Lura Fifteen System

3-way multi-amplified system using AudioLai amplifiers and electronics.

AudioLai S2-10 2-channel stereo final amplifier for driving the woofers.
AudioLai S4-7 4-channel stereo final amplifier for driving compression drivers.

Technical characteristics (measurements carried out in an environment 1 meter away at 90db):

  • Frequency response in room: 30Hz to 35kHz.
  • Linear phase response.
  • Harmonic distortion: 2nd and 3rd harmonics from 40Hz to 20kHz less than 0.5%.
  • Sensitivity: 102db/1watt.
  • Crossover frequency: 450Hz-7,000Hz

Control of frequency response, phase alignment, crossover frequencies, driver time alignment and impulse via digital signal processor (DSP) with a sample rate of 32bit/96kHz, with Analog Devices Floating point DSP processor SHARC ADSP21489 @ 400MHZ, with SNR of 125db. The system comes with 4 different types of presets to better adapt to any type of environment.

Furthermore, it is possible to request a customized calibration in your environment from an AudioLai technician, both remotely and on site.

The LURA QUINDICI system is recommended for 16m2 environments.

Diffuser dimensions: L600mm, D480mm, H1580mm.

For information do not hesitate to contact our staff by email:
or by phone or whatsapp: +39 379 1635323

View full details

Open Baffle with passion...

AudioLai speakers were born from the experience of the Lai brothers, these systems offer a three-dimensional and extremely detailed listening experience.